About Wellington Airport
Wellington Airport (WIAL) owns the private buried reticulation across its Rongotai campus (HV power, comms, water, wastewater/stormwater) and controls all excavation on its land via its own contractor induction and permit process — not beforeUdig. Contact the airport directly before any dig.
Their assets sit underground across their service area, alongside other utility networks.
Wellington Airport is one of 14 utility operators active in Wellington. Most building or landscaping work in this area touches multiple operators' networks at once - power, water and communications cables routinely share the same trench. The list further down shows the other utilities you'll likely need to contact alongside Wellington Airport.
Where Wellington Airport operates
Before you dig in Wellington City
Striking an underground pipe can cause injury, large repair bills and outages for your neighbours. Three steps to do it safely.
- 1
Find every operator that serves your site
Map your worksite on UtilityFinder to find every operator that serves the area - power, water, gas and comms in one view - so you don't miss anyone when sending locate requests.
Create your map - 2
Request a locate from Wellington Airport
Contact Wellington Airport and any other operators in your area to confirm the position of their underground assets before excavation.
Wellington Airport website - 3
Mark, protect, dig carefully
Mark the locate paint or pegs on site, hand-dig within 0.5 m of marked assets, and never assume a clear trench means clear ground.
Other utilities serving Wellington
Most building or excavation work touches more than one operator's network. Here's who else you may need to contact.
3 Waters
4
Communications
1Gas
2Fuel pipelines & terminals
2
Find every operator serving your site in 30 seconds
UtilityFinder shows every utility operator that serves Wellington - power, water, gas and comms - with contact details and locate-request links in one shareable view. Plan your dig with confidence.
Create your map - free